Need to reorder consumables for your Cobot Welder? Start with the ordering links below, check what came with your system, or browse the full consumables list.
Where to Order
Order directly from the manufacturer or your local weld supplier:
Miller: millerwelds.com/accessories
Tregaskiss: bernardtregaskiss.com/tregaskiss-consumables
Air Filters: automationdirect.com
What Came with Your System
Your Cobot Welder shipped with these consumables. If you need to restock, start here.
Image | Description | SKU | Qty |
 | Filter for Robot Cabinet
Recommended to replace at least once a month or as needed. | 086040-00 | 2 |
 | Miller Drive Roll Kit 0.035 and 0.045 V Groove | 235336 (Invision) 227061 (Deltaweld) | 1 |
 | Tregaskiss Nozzle 1/2″ bore, 1/8″ stick out, brass, bottleneck | 401-48-50
| 2 |
 | Tregaskiss Nozzle 5/8″ bore, 1/8″ stick out, brass, short taper | 401-87-62 | 2 |
 | Tregaskiss Contact Tip, .035 | T-A035CH | 5 |
 | Tregaskiss Contact Tip, .045 | T-A045CH | 5 |
 | Tregaskiss Teach Tip, 5/8" | T-A062TP | 1 |
 | Tregaskiss Gas diffuser, slip-on | D-ATSH | 1 |
Compatible Consumables
For a full list of compatible consumables by part type, see the sections below.
Miller Invision with S74 Feeder Consumables
Image | Description | SKU |
 | Drive Roll Kit | 235336 |
| Drive Roll Kit | 151026 |
| Drive Roll Kit | 151027 |
| Drive Roll Kit 0.045 ONLY Knurled V-Groove | 151053 |
| Drive Roll Kit 0.052 ONLY Knurled V-Groove | 151054 |
| Drive Roll Kit 1/16 ONLY Knurled V-Groove | 151055 |
| Drive Roll Kit .047 U-GR 4 ROLL
Requires Inlet Guide and Intermediate Guide Below | 151037 |
| Drive Roll Kit 1/16 U-GR 4 ROLL
Requires Inlet Guide and Intermediate Guide Below | 151039 |
| Guide, Wire Inlet .023 - 5/64 (Nylon) | 221912 |
| Guide, Wire Intermediate 3/64 AL (Nylon) | 205936 |
| Guide, Wire Intermediate 1/16 AL (Nylon) | 205937 |
Miller Auto Deltaweld Feeder Consumables
Image | Description | SKU |
| Drive Roll Kit | 227061 |
| Drive Roll Kit | 087132 |
| Drive Roll Kit | 046780 |
| Drive Roll Kit | 046781 |
| Drive Roll Kit | 191917 |
| Drive Roll Kit | 046782 |
| Drive Roll Kit | 046783 |
| Drive Roll Kit | 046784 |
| Drive Roll Kit 0.045 ONLY Knurled V-Groove | 046793 |
| Drive Roll Kit 0.052 ONLY Knurled V-Groove | 046794 |
| Drive Roll Kit 1/16 ONLY Knurled V-Groove | 046795 |
| Drive Roll Kit .047 U-GR 4 ROLL
Requires Guide Kit 056207 | 151037 |
| Drive Roll Kit 1/16 U-GR 4 ROLL
Requires Guide Kit 056209 | 151039 |
 | Guide, Wire Inlet Anti-Wear .023 TO 5/64 | 221030 |
 | Guide, Wire Intermediate .023-.040 (Nylon) | 056206
|
 | Guide, Wire Intermediate .045-.052 (Nylon) | 056207 |
 | Guide, Wire Intermediate 1/16 - 5/64 (Nylon) | 056209 |
 | Wire Guides Kit, plastic quick change, .035 | 293928
|
 | Wire Guides Kit, plastic quick change, 3/64 | 293929
|
 | Wire Guides Kit, plastic quick change, 1/16 | 293930 |
Tregaskiss AccuLock Consumables
Image | Description | SKU |
 | Nozzle 1/2″ bore, | 401-48-50 |
 | Nozzle 5/8″ bore, | 401-87-62 |
 | Gas diffuser, slip-on | D-ATSH |
 | Contact Tip, .035 | T-A035CH |
 | Contact Tip, .045 | T-A045CH |
| Contact Tip, 0.052 | T-A052CH |
| Contact Tip, 1/16" | T-A062CH |
 | Teach Tip, 1/2" | T-A050TP |
| Teach Tip, 5/8" | T-A062TP |
| Teach Tip, 3/4" | T-A075TP |
| Teach Tip, 10mm (.39") | T-A10MTP |
| Teach Tip, 15mm (.59") | T-A15MTP |
| Teach Tip, Adjustable Size | T-A001TP |
Tregaskiss Tough Lock Consumables
Image | Description | SKU |
 | Contact Tip, 0.023" | 403-14-23 |
| Contact Tip, 0.030" | 403-20-30 |
| Contact Tip, 0.035” | 403-20-35 |
| Contact Tip, 0.045” | 403-20-45 |
| Contact Tip, 0.052” | 403-20-52 |
| Retaining Head | 404-32-02 |
| Teach Tip, 15mm | 403-20-15MM |
| Nozzle 1/2″ bore, | 401-48-50 |
| Nozzle 5/8″ bore, | 401-81-62 |
Tregaskiss Tough Gun Consumables
Image | Description | SKU |
|
 | Liner 10' 0.035-0.045 | 415-35-10Q |
|
| Liner 10' 0.045-1/16" | 415-116-10Q |
|
| Liner 15' | 415-35-15Q |
|
| Liner 15' | 415-116-15Q |
|
| Polymer Liner, 10', 3/64" - 1/16" | 415-116-22 |
|
| Polymer Liner, 15', 3/64" - 1/16" | 415-116-23 |
|
 | Brass Jump Liner 13", 3/64" - 1/16" | 415-25-13 |
|
| Inlet Guide Cap, 0.035-1/16 Wire | 214-116 |
|
| Inlet Guide Cap, 1/16 - 3/32 WIre | 214-332 |
|
| Inlet Guide Cap, Teflon Liner | 214-9 |
|
Still Need Help?
If you can't find the consumable you need, tap the chat icon in the Beacon app to reach our support team.