There may be times when you want to reuse sections of one part in other parts. This guide will walk you through copying and pasting those sections.

Let's get started

  1. Copying Items

    1. Selecting Items

    2. Copy Items

  2. Pasting Items

    1. Pasting to Existing Parts

    2. Pasting to New Parts

Copying Items

Select the part that contains the items you want to copy.

Click on "Edit Part".

Selecting Items

Select the items you want to copy.

You can click on the items one-by-one.

You can click "Select Welds" to select all weld items.

Or you can click "Select All" after clicking "Select Welds" to copy all the items in the part.

Copy Items

Below, you'll see a button that says "Copy". Click it to copy your selected items.

A message will display to inform that the items have been copied.

Pasting Items

Pasting to Existing Parts

Click "Edit Part".

Click the plus icon where you want to insert the items.

In the panel, on the left hand side, select the paste icon (the last icon).

You should see the text "Paste Items..." with the number of items you copied in parenthesis. Click the Paste button.

Pasting to New Parts

Select a new part from your parts list.

Click "Edit this Part"

Dismiss the "Settings" modal.

Click "Edit Part".

Click the plus icon.

In the panel, on the left hand side, select the paste icon (the last icon).

You should see the text "Paste Items..." with the number of items you copied in parenthesis. Click the Paste button.

Did this answer your question?