Skip to main content

Exercise 1 - Creating a Part

Create your first part in Beacon

Matt Bush avatar
Written by Matt Bush
Updated over 2 weeks ago

Now that you have your Cobot Welder system set up it is time to create your first part. Follow along with Dan as he shows you how to do that.

Once you have completed this exercise, learn how to use linear welds in Exercise 2

Transcript

Setting up your first welding part

0:00

so you've got your robot set up it's

0:02

time to create your first part

0:04

so I'll grab my device here

Accessing the Beacon app interface

0:06

on the parts tab I'm going to select

0:09

that plus button in the bottom right

0:10

corner of the screen

Naming your welding project

0:13

you're going to give the part a name

0:16

hit next

Choosing weld settings (no technical knowledge needed)

0:19

then you have two options so you can

0:21

either choose some predefined weld

0:23

settings or you can enter the settings

0:24

manually

0:27

we'll use these settings

Part creation complete

0:31

and there we go I just created my first

0:33

part

Did this answer your question?